Tuesday, March 29, 2016

She will be missed



Leftover sexy Young Frankenstein gif




















. . . that I couldn't find a space for anywhere, but I made it so here it is.





Abby Normal: or, how do you work this thing?, part II





The article below (not written by me, I'm borrowing it not-for-profit) is a followup to my last post about home brain-zapping devices. This one is a "brain wearable" (I am not kidding you), which is some sort of ultra-sophisticated iphone that you strap to your head. Here it is described as all good, with no risks. It relaxes you, it invigorates you, it helps you think with blinding lucidity and get an advantage over the next guy with all the predatory grace of a Bengal tiger.

But as with taking a martini to relax and de-stress after work, one may be fine, but ten may be fatal. If you use this thing day after week after year, if you do in fact get addicted to it (and people get addicted to everything these days), how will you ever function without it?

What if your battery dies mid-thought?

Will it, in fact, REPLACE thought altogether, and induce a euphoric, highly-desirable, permanent vegetative state?




And (more important than anything!), will it enhance sexual performance? Can it be turned up or down to get just the right degree of stiffness (for no woman in her right mind would ever go near one of these; it's a strictly testosterone-driven trip)? Can it be adjusted for length of performance: one second; ten seconds; THIRTY seconds (to automatically drive your partner to moaning orgasmic heights)?

Think of it. Sex can be dialled up or down now, pre-set, and the gizmo can just take over for you. Call up your girl friend, tell her your problems are solved and you don't need that pesky counselling any more. I can see this taking Silicon Valley by storm.

Myself, I'm more interested in the Donald-Trump-obliterating aspect of the thing. There's a guarantee on this: says so right in the brochure, actually, but the risk to your cerebral cortex is considerable. One thousand frontal brain cells have to die to kill one memory of Trump.

But hey: who needs a cerebral cortex when you have an app that will literally reboot your brain?

Turn that thing up to eleven!






Thync CEO: Merging biology and technology will dominate this century

The story behind the miracle brain-zapping wearable

Wednesday February 18, 2015 By James Stables

Isy Goldwasser risked everything to launch Thync, the mood altering brain wearable that was the talk of CES 2015. When he quit his job at chemical engineering company Symyx in 2010, Goldwasser knew he wanted to create a device that could tap into the inner workings of our brains and emotions; the problem was, he didn't know how.

"It began with a huge risk. We knew there was a way to activate brain cells and pathways, but it was just a case of how. We wanted to give people access to their neural circuits," Goldwasser told Wareable.

The company's CEO is at his office in Silicon Valley. It's 9am and he's already plugged himself into Thync, his neurosignalling wearable for a shot of 'energy' Vibe. On the other side of the Atlantic, the Wareable office is about to go home, where – at some point in 2015 when Thync is released – we will be able sit down to enjoy a similar dose of 'calm' after a long day.

Like a futuristic espresso or a wearable technology whisky on-the-rocks, Thync is designed for those sluggish mornings or winding down after a long day. And Goldwasser's team are using it daily, and see others doing the same.




"I had the belief that we could find those pathways and tap into the delivered benefits. That meant I had to go looking for technology, and a lot of it didn't work," he explained.

"That's not being a smartarse. You go on a journey and try different directions. That's how you get ahead of the whole world."

On that journey Goldwasser met Dr. Jamie Tyler, a professor of Biological and Health Systems Engineering at Arizona State University. His 'U+ technology' made the product a reality, and Thync was born.
Choose your vibe

Thync is a small unit that works by placing small electrodes at the base of the neck. When you wear the device, a low current stimulates the nerves and cells in the brain, controlled by a smartphone app. You use the app to choose a "Vibe" to tune your brain too.

"We as humans aren't wired to call up our biology. But imagine if you could control your decisions when you want to, control your focus when you want to, or your creativity or self control, life would be a lot easier.




"We knew that Dr. Tyler had worked on ways from the outside in to activate nerves and brain cells. And we know that the pathways and networks make us everything we are," Goldwasser explained.

"So at the most basic level it began with the belief that if we have great people, we will find the pathways and network that we will tap into that will lead to benefits, to improve people's lives," he said.

What's more, Goldwasser said that the rise of Apple Health and Google Fit are paving the way for this kind of product.

"The proliferation of apps in healthcare mean that people are excited to do something different. Especially when it's an alternative to having a drink or taking a tablet, when those things are clearly unhealthy."

Whether Thync's indeed healthier isn't the decision of Goldwasser, it's that of the FDA, and the US medical regulatory body has done the company a favour by changing its guidelines over wearable devices.

"We're working with the FDA. It's great because they changed the guidelines last month, which separate what a wellness device is from a medical device. We certainly fit the wellness device category. We're non invasive. So we're in the right place with the FDA."

With FDA regulation off the cards, it means that Thync is on for a 2015 launch, though understandably, Goldwasser couldn't be drawn on the specifics.




Frontier psychiatry

The problem for Goldwasser was that the promise of a device that can put you in charge of your deepest emotions sounds too good to be true, and if it wasn't for his reputation, it may never have got off the ground.

"If it wasn't for my success at Symyx, no-one would have touched Thync. It was way too academic, it was a science experiment.

"I was really attracted to the frontier where biology and technology happen. Technology and biology will merge and react over time. If there's one frontier that will dominate this century, it's this one."

Biology and technology may be the future tech of the century, but here in 2015, there's plenty of it around. From advances in biotechnology, exoskeletons, cancer detecting bands to digital spinal chords, silicon and flash are melding. But unlike the emotion sensors, brainwave detecting gadgets and lucid dreaming wonder wearables, Goldwasser says that Thync is the real deal.

"What we have is unique, and while other companies are exploring the same area, one thing makes us different: we're not sensing. Sensing doesn't work. We activate what's already there."

It makes perfect sense, yet once the barriers of biology and tech have been broken down, could we go beyond energy and relaxation? Is it possible to go beyond emotions, and start helping people become better at sport or academically superior?

Goldwasser says that "the focus of Thync isn't on changing people, it's about giving them access to what they already have." However, that doesn't mean it's not possible to use the same techniques to unlock 'superhuman' powers.

"Theoretically, we could start making someone better. We're not going there, but people will."



  Visit Margaret's Amazon Author Page!


Monday, March 28, 2016

How do you work this thing?: Electroshock in the home




No kidding, the things I find. Now people are shocking their brain. They're buying these things on Craigslist or eBay, possibly used or faulty, and sticking electrodes on themselves because they heard somewhere that it "might help" with Parkinson's, depression, and whatever-else you want to get rid of.

The problem? There are no instructions! If there are instructions, they're probably badly-translated, like the How To Stop The Smoking thing I just posted. Unintelligible. So you have to guess at what you're supposed to be doing, or else go on one of those online forums. You know the ones I mean. A ragbag assortment of ill-informed opinions flavoured with paranoia about mainstream medicine.




This all seems about as safe as doing surgery on yourself, but in this era of home medicine, anything is possible and almost everything is unregulated. I can understand people's reluctance to go to the doctor. If I go to the doctor with a troubling symptom, s/he is likely to give me something to make the symptom go away. End of story. Whether it's pointing to cancer, heart disease or Parkinson's, symptom gone = patient well, or at least not complaining any more.

So I can sort-of understand this, but I'd never buy one, any more than I'd buy a used vibrator. It might short out on me and cause all kinds of trouble.

But if THIS shorts out on you, you might be in the worst sort of trouble.







Experts wary of electrical brain stimulation at home


BY ERIN ELLIS, VANCOUVER SUN MARCH 27, 2016 8:28 PM


Researchers are testing mild electrical stimulation to improve brain function and mental health, but warn do-it-yourselfers to be wary of treating themselves with models available online.

Dr. Fidel Vila-Rodriguez, director of the Non-Invasive Neurostimulation Therapies (NINET) Lab at the University of B.C., is starting to lend devices for home use to people with Parkinson’s disease and depression that will deliver a weak electrical current through electrodes placed on their temples.




The machines in his experiments can’t be adjusted above two milliamps — similar to the power created by two AA batteries. In contrast, some unregulated brain stimulators sold online can deliver about 10 times that amount of current, something he calls “worrisome.” It is an amount of electricity still small enough that users might not notice an immediate effect — or danger.

“You may feel just a tingling sensation, so the perception is of low risk, in part because of that. But the truth is we don’t really know about these unregulated devices,” he says.




Vila-Rodriguez’s research uses machines approved by federal authorities. “We’re using a bonafide medical device licensed by Health Canada.”

In contrast, products sold online with names like Thync and Foc.us are in a grey area, approved by no government body in North America. They are not classified as medical devices by the U.S. Food and Drug Administration or Health Canada. Yet their websites promise better brain performance, relaxation or energizing as desired.




Stanford University law grad and former UBC masters student Roland Nadler has a small collection of them which he doesn’t use on himself, but rather as examples of gaps in government regulations.

“These devices are a bit before their time. Or if they have a future, it’s almost always going to be with a professional intermediary,” says Nadler, currently a fellow at Stanford University’s Centre for Law and the Biosciences in California. “It’s too complex and sophisticated of a technology for most people to do at home.”





There’s an 8,000-member discussion group on the networking website Reddit about transcranial direct current stimulation, or tDCS, filled with home users asking each other how to use the gear, which comes with limited instructions. “What positions of the electrodes are used for depression? It is surprisingly difficult for a me to find a no bull**** guide on accurate placements. Can anyone help?” Or, more alarming, “How can I tell which cable is the anode and which is the cathode? Are the blues one and the whites others?”

Nadler says this sort of chat shows how difficult self-treatment can be. Placing the electrodes is a key step, and some sets make it easy to confuse the cathode, which is positively charged, with the negatively charged anode. Depending on the condition under treatment, the current must flow in a specific direction to a specific area of the brain. Reversing the prescribed flow of electricity could excite the brain when the user sought calming effects — a mistake someone seeking relief from insomnia, for instance, might not want to make.




“Getting the anode and cathode mixed up is serious business,” says the understated Nadler.

But the lure of better living through electricity is compelling for amateurs and professionals alike.




P. S. (or P. B.): yes, I know I just used this image, but it's great, isn't it? She seems like the kind of person who might stick electrodes on her head for a do-it-yourself version of electroconvulsive therapy. 

I wonder now, in this age when people become addicted to absolutely everything, if they might become hooked on these DIY brain-shockers. Or use it as a kinky sex aid, with role-playing: you be Frankenstein, I'll be the mad doctor! You be Bugs Bunny, I'll be the chicken! You be Jack Nicholson, and. . . you get the idea.

If ten volts feels good, could twenty feel even better? How about a hundred: will that erase all memory of Donald Trump?  If all that juice doesn't heal or treat anything, it might obliterate all trace of symptoms so you no longer care whether you're sick or well. Just keep turning up that dial, the one that goes to eleven. . . 

This could catch on.



  Visit Margaret's Amazon Author Page!


Sunday, March 27, 2016

Knit one - no, don't knit one




This is a case of federalizing the simple.

The following is a standard, free pattern for knitting slippers, the kind everyone makes five minutes after they learn to knit -  followed by a "variation" by something called the Authentic Knitting Board. This must be some obscure organization whose purpose is to spoil the pleasure of everything you do. Kind of like the Ministry of Love, which deals in hate; the Ministry of Peace, which deals in war; etc. etc. So this must be the Ministry of Knitting, which deals in unravelling your mental health.

Original Pattern

Using two strands of wool, cast on 30 stitches.

Knit in garter stitch for a bit less than the length of your foot (they tend to stretch, so don't worry if they seem a bit tight at first).

Then in the next row, knit one, knit two together to the end of the row. The final row is knitting two stitches together all across the row.

Then break off the yarn, thread it through the remaining stitches, and pull them up. Use the rest of the yarn to sew up the top, and the casting-on yarn to sew up the heel. Repeat for second slipper.




Ministry of Knitting version: Made to Fit Double Knit Slippers

By: Authentic Knitting Board

With a few simple measurements and calculations, you will be able to make slippers for anyone, from your child’s baby doll up to Great Grandpa! Not only that, but you will be able to use any weight yarn, the stitch of your choice, and different gauge knitting boards. You truly get to be the designer. Make them big and bulky or lightweight. Design them with a stand up, bootie style, or moccasin cuff. Or, make them with no cuff at all. Stripes, novelty yarns, and different stitch patterns are all ways to make slippers that are unique. Let your imagination soar. These make great gifts, and are quick and easy. This may be the last slipper pattern you will ever need, thanks to Authentic Knitting Board!

One of our loyal readers came up with this helpful guide to creating these slippers. View the Slipper Calculations Guide to gain some valuable assistance in knitting these cute slippers.

Skill Level-Beginner

Skills Required-Casting on, Binding off, Decreasing, Stitch pattern of choice





Materials:

Double sided knitting board with the number of needles required to cast on
Yarn of choice
Notions-Yarn needle, crochet hook

Samples were made with the 28” Authentic Knitting Board with Lion Brand Chunky USA—Purple Slipper, KK Blue Long Loom with 2 strands of worsted weight yarn—Red/Blue Slipper, and Décor
Accents 12” Fine Gauge AJAL with Lion Brand Magic Stripes—Striped Slipper.

Important--Read the “Help Section” before starting.

Calculations:

The first step in making these slippers is to measure the size of the foot. Four measurements are needed (measure to the nearest ¼”): A. From the top of the ankle bone down under the heel to the top of the ankle bone on the other side. B. From the heel to the middle of the arch. C. The width of the foot at the widest part. You may want to add ½”-1” to this measurement for more ease. The amount of ease your slipper will have will vary with the stitch you choose. A stretchy stitch won’t need as much ease, while a firmer stitch will require more. The amount of ease required also depends on how snug or loose you like your slipper to fit. Adding no ease will make the slipper snug and close fitting. Experience will tell. D. From the heel to the toe. You may want to add ½”-1” to this measurement if you want “grow room.” Record these here: A._____ B._____ C._____ D._____. Make sure to measure carefully so that the slipper will turn out the right size. There is also a place to record these numbers on page 2, for ease in doing the calculations.




Now you need to make a swatch with your chosen yarn, stitch, and knitting board. I recommend casting on at least 12 needles, more for smaller gauge boards, and knitting for about 3-4 inches. Keep track of how many rows you knit. You will need that number later. Remove the swatch by binding off with a crochet hook (see step #3 in the pattern). Now, measure the width of the knitted piece. Record this here:_____. Divide this number by the number of needles cast on. Record this number here: W._____. This tells you how much knitting you get per needle. Measure the length of the knitted piece. Record this here:_____. Divide this number by the number of rows knitted. Record this number here: L._____. This tells you how much knitting you get per row. Make sure to measure carefully so that the slipper will turn out the right size.

Divide (A) by (W). Record this here:_____. Add 8 to this number. If you added some ease to (C), are using thin yarn or a fine gauge board, or you just want a taller cuff, you may want to add 10-12 to the first calculation in the place of the 8, to give you more cuff. If you want a stand up cuff, you can add 6 or less in the place of the 8. If you want a “footie” style slipper (no cuff), don’t add anything to the first number. Round to the nearest whole number. Record this here: E._____.




Divide (B) by (L). Round to the nearest whole number. Record this here: F._____.

Divide (C) by (W). Double this number. Record this number here:_____. Now, subtract this number from the total number of needles cast on (E). Round to an even number, if necessary. Record this number here:_____. Divide by 2. Record this here: G._____.

Divide (D) by (L). Record this number here:_____. Subtract (F) from this number. Record this number here:_____. Subtract 3 from this number. Record this here: H._____.

A._____ B._____ C._____ D._____ (From page 1)

Decimal equivalents for common fractions (to help with calculations): 1/8=0.125 1/4 =0.25 3/8=0.375 1/2 =0.5 5/8=0.625 3/4=0.75 7/8=0.875

Sample Slipper: For those, like me, who like to “see” what they are doing, here’s an example of using the calculations to make a slipper on a fine gauge board with worsted weight yarn. First I’ll list the measurements and then show the calculations step by step.




1. Foot Measurement: A.—7.5”, B.—3”, C.—3”, D.—6.75”

2. Swatch Measurements: W—4” / 16 needles = 0.25” L—2.5” / 13 rows = 0.2”

3. 7.5(A) / 0.25(W) = 30 8 = 38 E.—38 (Cast on stitches)

4. 3(B) / 0.2(L) = 15 F.—15 (Knit this many rows)

5. 3(C) / 0.25(W) = 12 x 2 = 24, 38(E) – 24 = 14 / 2 = 7 G.—7 (Bind off this many stitches from each end.)

6. 6.75(D) / 0.2(L) = 33.75, 33.75 – 15(F) = 18.75 – 3 = 15.75 (I’ll round this up to 16) H.—16

(Knit 16 rows)

Pattern:
Cast on (E)____ stitches with your favorite method. Leave a long tail that will be used to sew up the back of the slipper later. Instructions for the Stockinette cast-on are at the end of the pattern.
Knit (F)____ rows in stitch of choice.
Bind off (G)____ stitches on EACH end of the board. To bind off on the end opposite the working yarn, simply slip a crochet hook into the first stitch on the front and back board, and pull the first loop through the second loop. Now, pick up the next front stitch and pull it through the loop on the hook, then the next back stitch. Continue until the required number of stitches are bound off. At this point, you’ll still have one loop on your crochet hook. Place this loop on the end needle on the back board. There will now be 2 loops on the end back needle. (See top picture.) Do the same to the other side with the working yarn, but pick up the back stitch first and then the front stitch (where the working yarn is attached). Also, it is very important to lay the working yarn across the stitches as you bind off. (See middle picture.) It will be buried inside and then be right where you want it when you are finished binding off.




Knit (H)____rows. On the first row, knit 2 stitches over 1 on the two back needles that have 3 loops on them from binding off. After the first row is knitted, all the needles should have 1 loop on them. Continue knitting the remaining rows as usual.

Decrease half of the stitches. Do this by lifting stitch 1 onto needle 2 then stitch 3 onto needle 4. Repeat for the whole board, both front and back. You will end up with every other needle being empty. If you have an odd number of stitches cast on, the last 2 needles will not have an empty needle between them. Wrap the row, skipping the empty needles (see bottom picture). If an odd number of stitches are cast on, you will wrap the last 2 needles consecutively. Knit the bottom 2 stitches over the top stitch. You should now have 1 stitch on every other needle. Shuffle all the stitches together so that there are no empty needles.

Knit 1 row.

Repeat step #5, except you don’t have to shuffle all the stitches together after decreasing.
Remove slipper by cutting the working yarn, leaving a long tail. Thread the yarn tail onto a yarn needle and slip the stitches, starting with the far left back needle (the one opposite the working yarn), back and forth across the board (1A, 1B, 2A, 2B, 3A, 3B, etc.) onto the yarn needle. Remove from the board.




Finish up by binding off the cast-on stitches (if the stockinette cast-on was used). Bind off is the same as done in step #3 of the pattern starting with the stitch on the end opposite the yarn tail. After binding off the last stitch, wrap the yarn tail around the hook and pull it through the loop. The piece will look like a capital T. Fold it in half from side to side. Sew up the back seam using the long tail left from casting on. When about 1”-1 ½” (more for larger sizes, less for smaller sizes) from the bottom, bring the bottom of the slipper down to meet the seam you are sewing (this will look like a capital T—see picture below right) and finish sewing closed. This gives the back heel a nice shape. Thread the yarn tail at the toe onto a yarn needle. Run the needle back through the toe stitches again and pull tight, then sew up the top of the slipper. You can sew just the top of the slipper and leave the cuff open to fold over moccasin style, or sew all the way up the cuff and then fold over for more of a “bootie” look, or sew all the way up the cuff and leave it standing up. Weave in all the loose ends.

Turn right side out.

Congratulations!! You’re done. Now make another slipper.

Read more at http://www.favecrafts.com/Loom-Patterns/Made-to-Fit-Double-Knit-Slippers#xKr2WDGTo4Gp4UAc.99

WAIT! THERE'S MORE! I just discovered a "help section" which is meant to make this project MUCH simpler.




Help Section:

When referring to the front board, this is the board nearest you when it is lying flat. The back board is the board furthest from you when lying flat. When making your calculations, you will run into partial numbers. You can either round up or round down. A lot depends on how stretchy your stitch or yarn is, if you want to leave “grow room”, and how you like your slippers to fit. I usually round up so the slippers won’t end up too small. When calculating (W) and (L) round the number to the nearest hundredth (2 places to the right of the decimal). For example if (W)=0.34373, record 0.34. But if the number in the thousandth place is 5 or above then you would round up. So, 0.34573 would become 0.35. If you have measured correctly, your slippers should turn out the right size. If you are unsure, or just want to check your measurements, measure the knitted piece at the end of step #2 and step #5. It should be the same as (B)(after step #2) and almost (D)(after step #5). If it’s shorter, add a row or two. If it’s a little longer, you could just leave it, or you could pull back a row or two. Remember when measuring after step #5 that the piece will be a bit shorter than (D) because you still have 3 rows to knit. When in doubt, take the time to measure. You’ll be glad you did. After binding off from each end, you may have to adjust how you wrap your needles to keep your stitch pattern. For example, when using ribbing you may (not always) have to switch from (1A to 3B) to (2A to 4B) to keep in pattern. By observing the pattern in the knitting, you will be able to tell if you need to adjust your wrapping. If using stockinette stitch, this will not be a problem. When wrapping the last 3 rows, I usually switch to stockinette stitch, as it’s easier to wrap with the empty needles. For a nicer finish when sewing up the front and back seam of the fold down cuff, sew the cuff seam on the right side (outside) of the slipper. The stitches will be hidden when the cuff is folded. This applies only to the part of the seam that makes up the cuff. The rest of the top and back seam is sewn on the wrong side (inside). Any size yarn can be used, but chunky/bulky yarn will give you more thickness and last longer. Ribbing is a very nice stitch to make slippers in, as it is thick and comfortable. If you are using a larger gauge knitting board, it may be helpful to wrap the board 3 times, when casting on, and then lift the bottom loop over the top 2. Then wrap as normal, always lifting 1 over 2. This will give more thickness. Using two strands of worsted weight yarn, held together, will make a nice thick slipper and give you many color combinations. Baby booties can be made by using baby or sport weight yarn and a small or fine gauge knitting board set at ¼” spacing. For closer fitting, lightweight “footie” style slippers, sock yarn and a fine gauge knitting board work well. Crochet a chain and weave it through the cuff of the slipper and tie into a bow. Be creative!! Keep a record of your swatches. That way when you want to make a pair of slippers out of the same yarn, you’ll already have that part done.




Definitions and Stitches:

Working Yarn—The yarn attached to the skein.
Stockinette cast on and stitch—Place a slip knot on the back left needle of the board. (“Back” meaning the board furthest from you when lying flat.) Call this 1A. Bring yarn down from 1A to 2B.
(This is the front of the board.) Wrap around 2B and go back up to 3A. Continue wrapping every other needle for the desired amount of stitches. Then take the yarn straight across to the needle directly across from the needle that was wrapped last, and wrap back to the beginning, covering all the needles that are empty. Lay a long piece of yarn (this is called the anchor yarn—see picture), about twice as long as the stitches, across the stitches and then wrap again. Every needle will now have 2 loops on it. Hook the loops over by lifting the bottom loop over the top loop and off the needle. Push the ends of the anchor yarn through the boards and tie loosely under the boards. You are now cast on. Continue wrapping in this pattern for the stockinette stitch. You only lay the anchor yarn on the cast on row.

If you love making slippers, check out our 14 Cozy Crochet and Knit Slipper Patterns!

Read more at http://www.favecrafts.com/Loom-Patterns/Made-to-Fit-Double-Knit-Slippers#JBJYO8JjYyB2t2BS.99

(No, don't.)

BUT WAIT, THERE'S EVEN MORE -

Yes! The comments section echoed much of what I felt about this Byzantine pattern. (Look it up.) Only one lady complained about all the whining.  The rest were definitely indignant. Knitters are strangely protective of their craft or science, and don't want it adulterated by newfangled gizmos, thank you very much. Most of them gave it one star. My favorite comment was from the disgruntled lady who had been knitting for 71 years and could not make head-nor-tails of this thing. I think the problem is that it was filed under general knitting rather than loom knitting. They call this a "knitting board", which most people have never heard of, and which is definitely confusing: I truly thought at first that it was an organization, like the Board of Education. (A darker connotation might be waterboarding.) Given the complications, I think I'm going to give knitting boards a miss.





I can't believe that this is exactly the pattern I want to knit but, after reading all through to try an understand what it was all about, I discover it required a loom! Why on earth is it under "Knitting"?

I too was looking for a double knit slipper pattern using regular needles. I don't own a loom either

What is a knitting board??? I agree with the lady that knitted for 71 years!!

I have been looking for slipper patterns for a friend. These patterns look great. I made the mistake of copying out a couple not realizing a knitting board is required. What on earth is a knitting board first & why can't you give us some good patterns without requiring one of these boards. Very frustrating. Jan

And just what is a knitting board? Knitting is with two needles, please have this pattern for knitting and keep "novelty" crafts under a different section. Thanks




First of all, "loom knit" should have been included in the title so those who were looking for loom knitting patterns would know to look here and for those who use needles would know NOT to look at this pattern. Two, it is hard to find loom knitting patterns whereas it is not hard to find knitting patterns for needle knitting. SO, for those who don't even like the idea of knitting looms, you should go look for needle knitting patterns. There are PLENTY out there, I've seen them.

I cannot believe the whining people who are complaining about a FREE pattern. Obviously a lot of work went into this pattern whether it is for a loom or straight needles. Show a little gratitude ladies. BTW, guess how I found this pattern? I clicked on "Loom Patterns" in the sidebar. Don't believe it? Here's the address to this page where the pattern is. http://www.favecrafts.com/Loom-Patterns/Made-to-Fit-Double-Knit-Slippers/ct/1

Hello, I don't use a knitting board and really don't want to go out and purchase this high priced item. When knitting slippers, why didn't you add the directions for standard knitting instructions? It would really made this so much easier for me and everyone else to read these patterns.

Never mind knitting boards! I have been kitting the usual way for 71 years - can't you put this pattern into a straight pattern, NO "KNITTINGBOARDS"????

I have never used a knitting board. Is there a way to convert this pattern to hand knitting? Thank you!

wonderfully complete in every way! thanks

Shark attack!






What can you give a 10-year-old boy who has everything (electronic, robotic, and technological) for his birthday? A knitted shark "lapghan", of course! This took A LOT of grey wool and some patience. The most challenging part wasn't the mouth with all those teeth, but the fins. They had to be suitably stiff, meaning I had to diddle around with sheets of craft foam. But the results were worth it - Ryan loved his shark!


I've never been paid $600.00/word




(Listed on Amazon today.)

HAROLD LLOYD - AUTOGRAPH SENTIMENT SIGNED

Price: $1,799.00 + $19.00 shipping

Only 1 left in stock.

Ships from and sold by HistoryForSale - Autographs & Manuscripts.

Estimated Delivery Date: March 29 - April 1 when you choose Expedited at checkout.

Authenticity Provided By Seller
Collectible Type original
Grade Rating Please see condition in item description
Entertainment Franchise Movies
Is Autographed Yes

1 collectible from $1,799.00

NOTE. I  vowed never to write about Harold again, though I'm keeping the title of my blog the same because it's too much bother to change it. But I happened on this, and thought it was interesting. That's about $140.00 per LETTER, if my shaky math is right.

Interesting, but depressing, because I am no longer paid anything at all.

And the message - I don't know who Gus Venaas was, probably the waiter with the napkin over his arm or something. So obviously Harold couldn't think of much to say.


Friday, March 25, 2016

Take you dislike most: or, you can to stop the smoke



How do I leave I want to leave smoking?

Albany Daily Star

(Blogger's note. I am not kidding. This piece ran word-for-broken-word in the Albany Daily Star. Perhaps they meant New Delhi. It has all the earmarks of my favorite thing: a very bad translation.)

March 25, 2016 4:21 pm








1. DAY

Type the root causes of smoking cessation in a list. Hang everywhere, this list will catch your eye; bathroom mirror, on the fridge or television. If you feel that a copy with you in your move will weaken again read disconnect it from your pocket.

Take your whole pack of cigarettes.

Only one pack of cigarettes and take you dislike most. So effortlessly you can not get the pleasure of smoking and you will not get what you expect when you drink. Normally you choose a brand that contains less nicotine and tar that allows the interior to adapt more easily to the days of nicotine in your body.




Paste Inside that package on your list showing the amount of cigarettes. Do not forget to save it before you burn every cigarette you drink and numbering. So soon you will have an idea of ​​how many days you smoked. “1” number one cigarette, smoking it you can not drink it, “2”, but not unbearably so much smoke you want first, and “3” of cigarette smoking is also where you can have it before drinking. The next time smoking and drinking, type in the situation you are in it. For example, the bus or while waiting for an important phone call or when you are distressed and anxious as a. When you want to drink Can any cigarettes, do not forget to complete this list to fill the job. Do not clean your ashtray. After a while you see with your eyes the disgusting ashtray picture emerges when filled to the brim.

2. DAYS

Today “3” No. smoking and drinking you will cheat yourself by enumerating errors.

Smoking, occupies the mouth of the smoker. It’s also another way to sugar-free chewing gum. With always keep gum. Instead of candy, and you can drink the water and eat fruit. Many people say that quitting smoking for fear of gaining weight. If you eat a balanced and planned to. If you have a cigarette burn your food habits developed over time by the exit for a short walk and 5 minutes from the table. Smoke filled your lungs instead will help you better enjoy the fresh air dining.




3 DAYS

“3” of torture to smoke too bad matters worse numbers. Today, perhaps “2” number can even drink it. Remember to save your cigarettes you drink list. Each cigarette before yourself, “Do I really want a cigarette? “The question of questions.

deep breathing smoke rather than try to exercise. Relax, give it two or three times to take a deep breath. You will feel really better. This exercise will support your decision to smoke.

Set a specific time you can stop the smoke. For example, the maximum period of days that can withstand up to measure how much smoke without smoking. The delay of the first day cigarette smoking as possible. If you are too addicted at least an hour, the average smoker If you are one to two hours and less than half a day smoker, try not to smoke. Please note that as the bus or the theater can judge for yourself in places where smoking is prohibited.

It’s time to change your brand of cigarettes. Now take a cigarette containing lower tar and nicotine in tobacco can further reduce the damage to your body.




4 DAYS

Today “2” you quit smoking. Be realistic. Only really need a “1” number one cigarette is really for a time as you need.

We relax a bit now. If you really go and eat what you like. Your money steak, pineapple, to spend on things like shrimp. Eat plenty of food especially a favorite. If you have a weight problem but be a little careful about the desserts.




Generally, select a media that you smoke. never smoke while you are at a cocktail party or a meeting room overwhelmed with cigarette smoke and the environment. If you set yourself your own limits, it would also have to comply with them.

Throw away your lighters and matches. Non-fire to burn you need to look for, you have to do what you think you will make it easier for many smokers.

5 DAYS

Now buying cigarettes. Carry with you the list you drink and cigarettes continue recording. Today, only “1” number of smokers will not forget.

Tell your friends that you quit smoking today. They will see great support, especially from non-smokers. Do not open your mind you know this decision ensures more.




We ask you do not shed your ashtray. Now it’s time to use them. All ashes and butts in your ashtray add a little water on to fill a jar. Keep this jar is always at your fingertips and you can smell a bit of smoke when we wanted to open the door. Can you still do want to smoke?

Remove ashtrays this evening to wash your closet on the top shelf. Tomorrow there would be no need for them will never smoke.

6 DAYS

24 hours no smoking.

Go to places where smoking is prohibited. Visit museums or your non-smoker friends, go to movies, watch movies in a row.

Stay away from alcoholic beverages. Alcohol and cigarettes go well together. Alcohol also weakens your willpower and strength.




7 DAYS

24 hours, more smoke.

Open your own money this week in a special savings account that the rest of the cigarette smoke. Pay the same amount in this account every week for a year. I will guess at the end of the year will see a lot more money is accumulated. whether this be something you can not get much money.

If you feel depression or physical symptoms associated with giving up smoking to seek help by contacting your doctor.

Do not forget that you are human. If you are a smoker you will be broken, do not succumb to despair immediately. Reread your reasons for quitting smoking and add any new reasons. Your experience will find your most effective technique on you. Continue to practice techniques that you find. Return to the program of the day when you feel forced. Go on. You can and you will leave.





  Visit Margaret's Amazon Author Page!



Tuesday, March 22, 2016

Pream? I think I'm going to scream





You already know I have a great fondness for Pream commercials. I've devoted entire posts to the product. Somehow-or-other, mysteriously, it was discontinued some time in the 1960s. Somewhere on the internet I read that it didn't dissolve properly, and if it truly had milk solids and butterfat from cream in it, it would eventually go bad.

But this commercial, and the following two gifs made from it, are from Pream's glory days. This transcends even the sublime "Pream or Cream?" ads that went on for ten or fifteen years.

Now you tell me. Can a cow's udder do something like this? What about gravity - isn't the milk supposed to go down, not sideways?  And how did that pail get so full? I'd offer multiple choice answers, but. . . no, I don't think so.







POST-POST OBSERVATIONS. It was frustratingly difficult to find any information on the demise of Pream. After all, the stuff was around for nearly two decades, then suddenly pulled from the market, never to return.

I found something listed on Amazon - one of those books you can pretty much read in its entirety on the site, so who'd buy it? - called Better Than Homemade: Amazing Foods that Changed the Way We Eat by Carolyn Wyman. Just by the title, you know she's pro-amazing, anti-natural, and in favour of the New and Improved.




The book had a little bit about Pream, and a lot about its successor. "The first powdered creamer to hit supermarkets in 1952 was called Pream. It was made of dehydrated cream, milk sugar, and nonfat milk solids. In other words, it was the real deal. But the processing required to dry it made it taste terrible. And the proteins in the milk made the product spill out in unsightly clumps."

Most of the entry is about Coffee Mate, the one that Changed the Way We Drink Coffee. It was touted as an "amazing discovery" that "eliminates the stale cooked taste of old-fashioned powdered creamers."




"Stale" and "old-fashioned" were the inverse of New, Improved, and Amazing. It's hard to believe Pream tasted THAT bad, implying that all those hundreds of ads where hubby or wifey couldn't tell if it was "Pream or Cream" were lying. I have read on other sites that the product wouldn't dissolve easily (not a problem with the filtered crank-case oil that is Coffee Mate) and left a film floating on the top. It's hard to believe that a product made of milk solids wouldn't eventually go bad or at least become stale-tasting. Coffee Mate is so processed that you can't really tell what it is, a desirable state for the manufacturers. After a while, real cream is an offense to you. You simply don't want something out of a cow's udder any more.

Or. . . whatever.








Monday, March 21, 2016

Nothing is so beautiful as Spring





Spring 

by Gerard Manley Hopkins


Nothing is so beautiful as Spring – 
When weeds, in wheels, shoot long and lovely and lush; 
Thrush’s eggs look little low heavens, and thrush 
Through the echoing timber does so rinse and wring 
The ear, it strikes like lightnings to hear him sing;
The glassy peartree leaves and blooms, they brush 
The descending blue; that blue is all in a rush 
With richness; the racing lambs too have fair their fling. 

What is all this juice and all this joy? 
A strain of the earth’s sweet being in the beginning
In Eden garden. – Have, get, before it cloy, 
Before it cloud, Christ, lord, and sour with sinning, 
Innocent mind and Mayday in girl and boy, 
Most, O maid’s child, thy choice and worthy the winning.